Stomra Guides

Stomra · Guide

Detail views

Drag a circle over a plan, section or elevation and a detail of that place opens at 1:10, live from the model and tied to where you drew it.

Section A–A, 1:50 3 A-601 The mark: number over the sheet it is drawn on cropped by the same shape 3 EAVE 1:10
A detail callout in a section, and the detail it makes. Move or resize the circle and the detail follows.

Three ways to a detail

3 A-601 Detail callout makes a new detail 5 A-602 Reference detail points at one that exists B A-603 Section as a detail a short cut, its own mark
The three marks a detail can have in its parent view.
ToolWhat it makesUse it for
Detail calloutA new detail view of the area you drag over, tied to the view you drew it in.A junction at one place: an eave, a sill, a foundation edge.
Reference detailNothing new: a mark that points at a detail you already have.A detail that holds in many places, such as a wall's build-up.
Section drawn as a detailA section at any scale, marked in plans by a detail mark instead of two section heads.A short cut through a slab edge or a step, drawn at 1:10 or 1:20.

Two more kinds of view hold detail drawings: a drafting view is 2D only, with no model in it, and a type detail draws one wall, floor or roof type on its own (see Type details).

Make a detail callout

  1. Open the plan, section or elevation you want to detail.
  2. Choose Views ▸ Create ▸ Detail callout.
  3. Drag a circle or a box over the area to detail.
  4. A detail view of that area is made at the detail scale, 1:10 unless your drawing standards say otherwise. The mark appears where you drew it.
  5. Double-click the mark's number to open the detail, and draft there.

A callout drawn on a plan is a horizontal detail: the same level and the same cut as its plan. A callout on a section or an elevation is a detail of that drawing.

The mark is a thin dash-dot circle or box with a leader to a short line: the detail's number above it, the sheet the detail is placed on below. Move or resize the circle in the parent view, and the detail's crop follows. Drag the label to where it is free of the drawing; it stops at the view's crop.

How to finish a detail on the model's cut, with 2D components, insulation, membranes, notes and saved details, is described in Drafting on the model.

What the detail view has

Press a callout in its parent view, or the detail itself on a sheet, and the Inspector shows the detail: its scale, crop, shape and Parent view.

PropertyWhat it does
Callout shapeRectangle, Rounded rectangle (with Callout corner radius) or Circle. The mark in the parent and the detail's own crop are the same shape: a round callout gives a round detail.
Detail outlineThe detail's edge, dash-dot in its shape, on screen, on sheets and in the PDF. Turn it off for a detail without an edge.
ScaleAny scale; a new callout starts at the drawing standards' Detail scale.
Detail LevelHow much of each layer is drawn. At Fine, layers drawn with a 2D family (roof tiles, battens, boarding) show it in place of their hatch.
Crop region visibleShows the crop as a frame you can drag; the callout in the parent follows.

A detail is a view like any other: it takes dimensions, tags, notes, text, regions and detail items. Its title gives the number, the name and the scale.

Point at a detail that exists

  1. Open the view where the reference belongs.
  2. Choose Views ▸ Create ▸ Reference detail.
  3. Drag a circle or a box over the place.
  4. Pick the detail it refers to. The list holds only details: the details, then the drafting views.

The reference draws the same mark as a detail callout, with the number and sheet of the detail it points at. No new view is made, so one detail can be referred to from as many places as hold it.

Sections drawn as details

A section that is short on the plan is drawn as a detail mark: its cut, and at one end a divided ring on a black triangle pointing the way you look, with the number over the sheet in the ring. Under Mark in plans in the section's properties, choose:

A project chooses the look of its marks under Project Information ▸ Drawing standards: Stomra's own, SIS Bygghandlingar, half-filled triangles, the divided ring on a black triangle, or half arrowheads, each drawn beside its name. The same page sets the Detail scale and the shape a new callout has. The marks are the same on screen, on sheets and in the PDF.

Type details

A type detail draws one wall, floor, roof, ceiling or foundation type on its own, with a dimension for each layer and in total. Every type with layers can have one, placed in the model or not, so a project's build-ups can be drawn before anything is modelled.

  1. Choose Views ▸ Create ▸ Type detail, or right-click a type in the Types tab ▸ Create type detail.
  2. The detail comes with a build-up text beside it: the U-value and the layers from outside in.
  3. Change the type, and every type detail and build-up text of it changes.

A roof type's detail is drawn at the pitch its roofs have; Pitch in the Inspector sets another. Type details are a natural target for a reference detail: draw the build-up once, and point at it from every section where it occurs.

Details on sheets

The Navigator lists each detail under the view it is drawn from, and all of them together under Details, with their parent's name. Type details have their own group, grouped by walls, floors, roofs, ceilings and foundations, and drafting views theirs.

Place a detail on a sheet as any view. The mark in the parent then shows the sheet it is on, on screen and in the PDF. Press the detail on the sheet to see its number, title, rotation and place on the sheet in the Inspector first, then the view's own properties; press empty paper to see the sheet again.

Good to know