Stomra · Guide
Lights in the walk
The luminaires you model give light. Switch them on and off, by hand or through your assistant, and walk the building in the evening.
How it works
Lights, spots, track lights and emergency lights you place in the model are luminaires. In walk mode, and in a 3D view at night, a luminaire that is on glows and lights its room. Three things decide what you see:
The type
How much light a luminaire gives, of what colour, and where it goes.
The scene
Which lights are on, saved with a 3D view, beside its sun.
The switches
What each switch controls, so a switch in the walk turns the right lights.
Switching a light never changes the model. Which lights are on belongs to a view, so a view such as "Evening, kitchen and living room on" is walked, exported and shown on the client portal as it is, while the elements and the project history stay untouched.
The light a luminaire gives
A luminaire type's light is set in the Type tab's Light section:
| Value | What it does |
|---|---|
| Luminous flux | How much light, in lumen. |
| Colour temperature | The colour of the light, in kelvin: warm at 2700 K, cooler at 4000 K. |
| Beam angle | How wide a spot's cone is. |
| Distribution | Where the light goes: down, up, both, or all round. |
A type that gives only its power in watts is lit by an estimate, about 100 lm per W, and says so. A 6 W recessed spot is then about 600 lm; a 30 W pendant about 3000 lm.
A spotlight, or any luminaire whose light goes down or up, can also be aimed: in the Inspector under Aim, set its tilt and turn, or press Aim at… and click the point its light should go through. A type's Throw and Light falls off (indoors or outdoors) let a floodlight light a façade to the top.
Which lights are on: the view's lighting scene
Each 3D view keeps a lighting scene: which lights are on, and how far dimmed. Walk mode starts from the scene of the view you walk from, and at the view's sun, so an evening view is walked in the evening.
Switch lights as you walk
- Open a 3D view and press Walk.
- Walk up to a switch and press E, as you would to open a door. It turns what it controls on or off. Where a switch controls nothing, it turns its room's lights.
- Open the walk's menu for the Lights row. It says how many lights are on, and has All on and All off. Once you have switched something, As the view puts the view's scene back.
- To keep what you switched, choose Save to the view. The lights as they are become the view's lighting scene. Without saving, your switching lasts for that walk.
Luminaires that are on glow and light their rooms, and light does not pass through walls. The lights nearest you cast shadows; the others light their own room without shadows.
Let your assistant switch them
An assistant connected to Stomra switches lights on, off or dimmed in a 3D view's scene, by room, by switch, by circuit, by level, by kind or all at once. Ask, for example, "turn on the lights in the kitchen and dim the living room to half". Its answer says what it switched, and which names found nothing, such as a switch that controls no light.
The assistant can also take a picture of the walk at a room, a time of day and the view's lights, and show it to you, without changing what is on your screen.
The same lights in the 3D view
A 3D view shows the lights too. In the view's Sun menu, switch the lights on and set the time past sunset: the view goes dark and the luminaires shine, with light in the rooms around them. Night, beside the sun on the view bar, does both in one click; a second click takes the view back to noon. They are the same lights as in walk mode: on in the view means on when you walk from it, and the other way round. Lights show in the Shaded style.
Check the lighting
Systems ▸ Check systems names, room by room, the luminaires no switch controls, the switches that control no light, and the rooms with no light. It also estimates each room's light on the floor, to compare with your organisation's own values.
Good to know
- Only a few lights cast shadows at once: none on Low, one on Medium, two on High and Ultra. The rest light their room's box.
- The room estimate assumes a utilisation of 0.5 and a maintenance factor of 0.8. It is for comparing rooms, not a lighting calculation.
- Light distributions from photometric files (IES, EULUMDAT) are not read.
- A luminaire type's light and a view's lighting scene are saved in the project's OpenEik model, so other tools that read OpenEik read them too.